W11S Plate Rolling Machine Structure-Specifications of W11S-30X2000 Plate Rolling Machine 2018 latest version (2)_CSM-China Sunrise Machinery
Contents
1. main functions and features
2. Main technical parameters:
3. The structure of the machine
3-1 Upper roller device
3-2 Lower Roller and Horizontal Mobile Device
3-3 Roller device
3-4 Main Drive
3-5 turn over device
3-6 Fixing, Overturning Side Frame, Chassis, Fixing, Overturning Side Frame, Chassis Welded Steel Plates, CO2 Gas Shielded Welding, Postweld Annealing Stress Removal, Shot Blasting.
4. Hydraulic system
5. Electric control system
5-1 Overall Overview
5-2 Various Protections
5-3 Various interlocks
5-4 Failure indication
6. CNC system
6-1 general overview
6-2 digital display function
Rolling machine calculation system operation method
7. W11S-30X2000 Plate Rolling Machine Technical Features
7-1 Drum-shaped upper roller, lower roller lower roller matching adjustment, high precision product straightness
7-2 Rear-bend rolling system, high-precision roundness of product (80% of the machine's rear bending capacity)
7-3 Reduce the amount of misprints
7-4 High Precision End Prebend
7-5 Operation Procedure and Method
Sunrise Plate Rolling Machine Co., Ltd. >> News >> Technical Parameters Description >> Specifications of W11S-30X2000 Plate Rolling Machine 2018 latest version (2)

Specifications of W11S-30X2000 Plate Rolling Machine 2018 latest version (2)

Contents
1. main functions and features
2. Main technical parameters:
3. The structure of the machine
3-1 Upper roller device
3-2 Lower Roller and Horizontal Mobile Device
3-3 Roller device
3-4 Main Drive
3-5 turn over device
3-6 Fixing, Overturning Side Frame, Chassis, Fixing, Overturning Side Frame, Chassis Welded Steel Plates, CO2 Gas Shielded Welding, Postweld Annealing Stress Removal, Shot Blasting.
4. Hydraulic system
5. Electric control system
5-1 Overall Overview
5-2 Various Protections
5-3 Various interlocks
5-4 Failure indication
6. CNC system
6-1 general overview
6-2 digital display function
Rolling machine calculation system operation method
7. W11S-30X2000 Plate Rolling Machine Technical Features
7-1 Drum-shaped upper roller, lower roller lower roller matching adjustment, high precision product straightness
7-2 Rear-bend rolling system, high-precision roundness of product (80% of the machine's rear bending capacity)
7-3 Reduce the amount of misprints
7-4 High Precision End Prebend
7-5 Operation Procedure and Method

3-3 Roller device

Roller device is composed of silk screw mechanism, inclined wedge mechanism, idler and so on. The roller is made of 45# steel, quenched and tempered, and the hardness is HB190-220. The surface hardness of the roller is lower than the surface hardness of the lower roller, and the surface turns spiral groove, which effectively prevents the next tired oxide, and the roller is damaged due to impurities. On the surface, the idler can be adjusted up and down and adjusted up and down according to the size of the rolled sheet.

Both ends of the idler roller adopt self-aligning rolling bearing with low frictional resistance. From thin plate to thick plate, the rolling range is wide.

Roller device of W11S 30X2000 Plate Rolling Machine



Roller device of W11S 30X2000 Plate Rolling Machine


3-4 Main Drive

The main transmission consists of a main motor, a V-belt, a spur gear reducer, and an electrohydraulic actuator brake. The main drive can be reversed to provide power for the rolling of the sheet.

Main Drive of W11S 30X2000 Plate Rolling Machine

The main motor uses three-phase asynchronous motors for lifting and metallurgy.

The main reducer adopts Q235-A steel plate weldment to perform stress treatment.



3-5 turn over device

The overturning device is composed of an overturning frame, a ram, and an inverted oil cylinder pin. The single-stage cylinder is used for the overturn cylinder and the piston rod of the overturn cylinder is chrome plated. The tipping device tilts the inverted side frame to facilitate removal of the workpiece in the axial direction of the roller and completes the unloading step. After the rollover frame is reset, the next workpiece can be processed.

turn over device of W11S 30X2000 Plate Rolling Machine
turn over device of W11S 30X2000 Plate Rolling Machine
turn over device of W11S 30X2000 Plate Rolling Machine
turn over device of W11S 30X2000 Plate Rolling Machine

3-6 Fixing, Overturning Side Frame, Chassis, Fixing, Overturning Side Frame, Chassis Welded Steel Plates, CO2 Gas Shielded Welding, Postweld Annealing Stress Removal, Shot Blasting.


The fixed, inverted side frame is used to house the two main cylinders.

turn over device of W11S 30X2000 Plate Rolling Machine

The chassis adopts a frame structure, which has a high torsional cross-section coefficient, less anchor bolts, and convenient installation and debugging.

turn over device of W11S 30X2000 Plate Rolling Machine



Related Posts