1.The max width of the plate: 1000mm
2.The max thickness of the plate: 3mm
3.The material of plate: Carbon steel sheet or Stainless
4.The yielding limit of the plate: 245Mpa
5.The main motor power: 2.2kW
6.The hydraulic motor: 4kW
7.The normal work pressure of hydraulic system: 8-12Mpa
8.The Auto-hydraulic ability: Manual feeding,sutomatic bend and dischargeworkpiece. 9.The bend process should 30 seconds,but a total work process should with fedding and discharge else.
Hydraulic 2 Roll Urethane Plate Bending Machine is a new series device.
On the device,the up roller is steel roller,and the bottom roller inside is steel roller outside is elastic layer.
When operate it, feed the plate between the two rollers, and adjustment the distance of the two rollers.
Let them connect-down pressure-bottom roller deformation,drive the two rollers, so the plate continous coiled into a shape.
This device with some advantages like as, one time coiled into a shape, high efficience,high geometry accuracy,good surface without scratch,simple structure with only 2 rollers,operate easy,it is easy to realize auto operation procedure.
Hydraulic 2 Roll Urethane Plate Bending Machine is a new kind of plate bending machine. It has a top roll (upper roll) and a lower roll (bottom roll). The top roll is a rigid steel roller and the lower one is flexible and rubber-coated. The flexible roller is close to rigid roller to make the deformed work piece become qualified shape. During operation, we should feed the plate between the two rollers and then adjust the distance of the two rollers. Our two roller plate rolling machines are flexible so that their plate surface can not get wear and tear early. The obvious merit for this plate bending machine is without pre-bending and trimming. It can roll into various shapes, such as circular, elliptical, conical and customized shapes.
In order to keep two roller plate rolling machine dry, the talcum powder could be sprinkled on the rubber roller.
The oil on the plate must be rubbed off.
The regular lubrication work is necessary for the lubrication parts of this plate bending machine.
copyright © Borisbang Industrial Technology (BIT) 2019