|ModelW11×NC||Max plate thickness（mm）||Max pre bending thickness（mm）||Max Bending|
|Plate yield limit（Mpa）||Max specification minimum drum diameter（mm）||Up-roller Diameter|
|Next roller center distance|
|Roll plate speed |
The w11x 3 roller bending machine has a pre-bending function at the end of the sheet, which can feed the sheet metal at a time, and can complete the sheet end pre-bending and the roll forming of the workpiece without turning the head. The three work rolls are the main driving rolls. The lifting of the upper roller and the horizontal movement of the two lower rollers are all hydraulically driven. The lifting displacement is automatically leveled by computer control, and the screen display synchronization accuracy is ±0.2mm.
The w11x 3 roller bending machine can be pre-bent and calibrated. The chassis is heavy and the center of gravity is low. The equipment is stable. The three-roller is fully driven and the three rollers are bearings, which are fully powered and do not slip. The center distance is adjustable, and it can be adjusted when rolling thin plates and thick plates, and the center is adjustable from a single side adjustable roll cone.
w11x 3 roller bending machine can pre-bend the ends of plate and then roll it to specified shape with one time loading without reversing it.
The 3 rolls on machine are all driving rolls and upper roll and both lower rolls can be hydraulically driven for moving vertically and horizontally respectively.
The vertical movement is controlled by computer and displayed on screen with automatic leveling and synchronization accuracy of ±0.2mm.
The tilting and resetting of bearing body are hydraulically realized.
A balancing mechanism is arranged at tail of upper roll for easily discharging the rolled workpieces and cylindrical parts.It is suitable for steel plate and galvanized sheet.
It can bend sheets with a thickness of 1mm-200mm and a width of 8000mm.
Pressure on the
Max bending thickness
Max bending width
Top roller diameter
Lower roller diameter
between two rollers
The central distance can be adjustable
Yield strength of plate
Working length of the rollers
Cylindrical gear decelerator is used in this machine. This kind of gear is formed
through carburizing and quenching of high-tensile low-carbon alloyed steel,
the hardness of surface of gear can achieve HRC58-62, it is of high-precision,
high contact, high transmission efficiency, high bearing capacity, stable performance,
small volume and long service life as well as easy-maintenance and easy-installation.
Rigidity of working
Top roller: 42CrMo, first forged piece go through rough machining then quenching
and tempering treatment at HB260~300, after that finish turning then
medium frequency quenching of surface at HRC48~52
Lower roller: 42CrMo, first forged piece go through rough machining then quenching
and tempering treatment at HB260~280, after that finish turning
then medium frequency quenching of surface at HRC48~52
Main motor power
PLC control, In the actual operation, using PLC is more cost-efficient.
PLC:OMRON OR SIEMENS
Low Voltage Apparatus: SIEMENS
Data storage, power-off memory, each roller position display
Hydraulic system: YUKEN
1 months after the sales contract become effective
we offer two kinds of technical support and services: one is that we show
how to operate the machine at our factory; another is that we
sent our technicians to the customer’s factory to make re-installation and
debugging, but the customer should pay our technicians
for their flight tickets fee (go and back), room and board fee
and abroad and home travel cost, besides, the customer need pay our
engineer some fee ($50-$100 each day) for installation and training.
Warranty time: one year(it will be counted from the day that customer
receive the machine and finish the installation and debugging)
We always use the shrink film to wrap up the electric system, hydraulic system
and some naked steel parts (without painting ) to protect these parts from air
corrosion or use paper wrap these part first and then brush oil to protect them.
We paint the machine according to the customer’s request
This machine is of stable structure, reliable performance, so it is the most optimal type for heavy-duty equipment.
The top roller can make the vertical movement, while the lower rollers make horizontal movement. Compared with top roller all directional adjustable type, it more stable, and it has low fray when slipping, high synchronous precision and few trouble.
The pre-bending is achieved through movement of lower roller bearing seat to make the top roller and lower roller in the asymmetrical position. When rolling, the hydraulic motor or decelerator and universal joint drive two lower rollers rotated.Structure
The whole machine is made up of top roller,lower rollers,support roller,main drive,hydraulic drop end (tipping device),left/right frame,chassis,balance device,electric system and hydraulic system.Top roller device
Top roller device is mainly made up of oil cylinder,top roller bearing seat,top roller and double-row self-aligning Roller Bearing. The needed pressure for rolling plate comes from two oil cylinders. The working pressure of mail cylinders is 19.5Mpa.Lower roller device
Lower roller device is made up of lower roller,lower roller bearing seat, lower roller sliding bearing, telescopic oil cylinder or decelerator,automatic oiling device and etc.. Decelerator drives the lower rollers rotation. Horizontal movement is driven by oil cylinder.Support roller device
Support roller device is made up of support roller,support bearing seat, sliding rail decelerator, wedge and etc.One group support roller, 4 bars for each group, and it can be up down adjustable according to the plate specification.
copyright © Borisbang Industrial Technology (BIT) 2019